Carburator accel. pump and spring?

By DJ194950
March 20, 2015 in Technical Archives

https://p15-d24.com/topic/38314-carburator-accel-pump-and-spring/

Followers 0

Recommended Posts

DJ194950

Posted March 20, 2015

DJ194950

Members
- 3.8k
- 4
Location: Ca.
My Project Cars:Attempting to finally complete this longtime project. many changes not fitting this forum as it has many Chevy and other parts. Just not aware of this forum or parts availability way back then . Wish I had known but I am here! Just redoing the front brakes are testing my patience and endurance. Still plan a rearend change to a Explorer or Jeep. 50 Ply. Suburban, Hot rodded, 80 % done, on hold, w/ 49 ply. front end w/ grille -v-8 . May sell soon as I can no longer do heavy bending, lifting, etc.!

- Report

Posted March 20, 2015

Does the spring length need to be long enough to hold tight against the piston and top washer or have at least the 1/2" free play as per the pics of my parts??

Thanks for you input!

Quote

Jeff Balazs

Posted March 23, 2015

- Report

Posted March 23, 2015

Seems like mine was just like yours.

Jeff

Quote

DJ194950

Posted March 23, 2015

DJ194950

Members
- 3.8k
- 4
Location: Ca.
My Project Cars:Attempting to finally complete this longtime project. many changes not fitting this forum as it has many Chevy and other parts. Just not aware of this forum or parts availability way back then . Wish I had known but I am here! Just redoing the front brakes are testing my patience and endurance. Still plan a rearend change to a Explorer or Jeep. 50 Ply. Suburban, Hot rodded, 80 % done, on hold, w/ 49 ply. front end w/ grille -v-8 . May sell soon as I can no longer do heavy bending, lifting, etc.!