Don Colliau Posted February 25, 2015 Report Posted February 25, 2015 Mine is bolted directly to the frame with no rubber insulator and it traps the inner fender bracket between the body mount and the frame mount. Is that the way it is supposed to be? I am getting ready to replace all of the rubber on the mounts. Thanks, Don Quote
Plymouthy Adams Posted February 25, 2015 Report Posted February 25, 2015 most forward mount at the firewall..taper pin into hole with cup washer and nut... Quote
suntennis Posted February 25, 2015 Report Posted February 25, 2015 (edited) Adams is correct there is a stud that goes thru the frame in the front with a couple of washers and nuts. One of the washers is dome shaped. These bodies did not come with anything between the body and the frame at the base of the firewall like the other body mounts with rubber. Edited February 25, 2015 by suntennis Quote
Don Colliau Posted February 26, 2015 Author Report Posted February 26, 2015 Thats exactally what I have. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.