Lou Earle Posted June 15, 2007 Report Posted June 15, 2007 post pic of what u need - would a 48 do? Quote
Tim Frank Posted June 15, 2007 Report Posted June 15, 2007 Tim, If you are not in a panic, I'd be happy to rev up the old Atlas and turn a couple of those for you. I would need the actual dimensions. Could the centre section be hex?....i.e. I could turn down a piece of 7/16 hex stock ~ or just start with on-size CRS rod. I could get it done next week if that is soon enough, and mail it. Rgds, Tim Quote
randroid Posted June 16, 2007 Report Posted June 16, 2007 Tim, The "Other Tim" gave you the best option you might have, but the discussion reminded me that when in NAPA a few days ago I saw on one of those vertical spinning racks they have an entire section devoted to headlamp bolts. Probably of little use in your situation there were dozens of styles, most of which were new to me. They also had two entire racks of trim clips, so it sounds as though NAPA is expanding into stuff we could use. That will be my first stop when it comes time to button-up Pigiron after she's painted. -Randy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.