Jump to content

Englers Junk Yard Crushing out 700 Cars/Trucks


Recommended Posts

Posted

Englers has 30's, 40's, 60's cars trucks. Starting to crush out now (Oct 2013) Owner is Bob.

 

Update on Engler's Junk yard off I-81 in NE Penna, Bob who owns the place says they will be crushing starting now. Hundreds of 40's, 50's, 60's cars, most are beyond restoration, but you can easily kill an afternoon just walking around. Lots of cars with decent glass, stainless trim, decent bumpers, busses full of hubcaps and other parts. Closed all day Sunday, and also closed Wed and Sat afternoons. I would recommend calling first (570) 868-3990. Take I-81, Exit 159 Nuangola, head west 2-1/2 miles to 1768 Stairville Road. White garage on the left "Englers Auto Parts", stop there to sign release form and to get directions to the yard.

Near the burg of Wapwallopen.
Yard is located in Dorrance Twp., 2 1/2 miles
off Route 81 exit 159 (Nuangola exit).

Hours: 8:30 am to 5 pm M, T, Th, F
8:30- Noon Wed and Sat

Mailing address:
Englers Autos and Parts
1768 Stairville Rd
Wapwallopen Pa 18660

PH: (570) 868-3990
Posted

I bet he will have the front fenders and grille I need for the 63 Fury convertible I'm trying to sell. Hate like hell to spend any more money on it,but having the fenders and grille would make it easier to get rid of.

 

Thanks for the tip. I just might call him tomorrow and see what he has.

Posted (edited)

Found an "explorer's" video of this salvage yard on YouTube. It's a couple of years old, but I'd bet most of the stuff hasn't moved an inch since. ... That said, there's a lot of cars that don't look like much, but a few that definitely do.

 

And here's a thread at another site with photos from about three years ago, and some of the pics are missing. Still, you can see some things.

Edited by GlennCraven
Posted

This is a shame! I'll bet there are a lot of parts I could use. If they weren't so far away I would go there. They should have advertised on here or in Hemmings. 

  • 2 weeks later...
Posted

I put a sign out for him at Hershey Car Show last week at my spot on Saturday as it was pretty much a wash out there all week. Alot of people wrote the number down for him hopefully it will get people up there to buy something.

Posted

Here is an update on Englers. I wasn't there just someone that was there last week on 13 Oct 2013. Here is what he says. There are alot of pics on For A-Bodies only.

 

 

2 topics on this story,,,on this site

was there today monday,,, he says half the cars are gone,,,the rest will take about 2 years,, there is no crusher there now,,scrap pirces up there are too low,,

a hand full of 40 mopars,,,early 50s mopars,,a few mid 60s mopars,,

the pic of dart above vinyl top trim all intact u remove it 100 bucks

VOLARE/ASPEN guys,,, there are a set of quarter window louvers in his shop,,, a few clips missing,,but nice shape,,,the car is in the yard with the windlw plugs if u wanna convert to the R/T OR ROAD RUNNER quarter windows,, a 57 mopar wagon,, 1 68 notch back 1 67 fast back,,several dusters and dart sports,, some C bodies,, a few 40/50 pick ups,,,

he seems reasonable on prices if u remove the part,,, i bought a pair of 1940 dodge fenders with the valance and hood linkage on both fenders,, a few pin holes,,, stored in side kinda,, 50 bucks for the pair,, with the inner fender wells ,,,couldnt let um sit and get crushed,,,

buses ful of tail lites,,,hub caps,,,there is stuff there,, no real useable sheet metal from the 40/50s cars,,,,,was worth the 2 1/2 hour ride for the memories,,,,


 
  • 2 weeks later...
Posted

Update on yard is now he is not crushing ouf for another 2 years. Says scrap prices to low right now.

 

 

Could explain why the local salvage yard here has about 100 flat cars at the back of its lot and an idle crusher. They must be waiting until scrap metal prices improve.

Posted

   Today, here in the scrap melting heart of America, the sign said $220/ton for junk cars. 

 

 

That's a lot more than it was here a few months ago; $190 per ton. I don't know what it is right now.

Posted

I just read on the Shanghai Metal Market, the past 7 weeks of scrap is about the same.

Chicago, Pittsburg, Philadelphia,,,,average $318 per ton.

Chicago,,,$344 ton...

New York,,,,$284 ton...

  • 3 weeks later...
Posted

 

Here is an update on Englers. I wasn't there just someone that was there last week on 13 Oct 2013. Here is what he says. There are alot of pics on For A-Bodies only.

 

 

2 topics on this story,,,on this site

was there today monday,,, he says half the cars are gone,,,the rest will take about 2 years,, there is no crusher there now,,scrap pirces up there are too low,,

a hand full of 40 mopars,,,early 50s mopars,,a few mid 60s mopars,,

the pic of dart above vinyl top trim all intact u remove it 100 bucks

VOLARE/ASPEN guys,,, there are a set of quarter window louvers in his shop,,, a few clips missing,,but nice shape,,,the car is in the yard with the windlw plugs if u wanna convert to the R/T OR ROAD RUNNER quarter windows,, a 57 mopar wagon,, 1 68 notch back 1 67 fast back,,several dusters and dart sports,, some C bodies,, a few 40/50 pick ups,,,

he seems reasonable on prices if u remove the part,,, i bought a pair of 1940 dodge fenders with the valance and hood linkage on both fenders,, a few pin holes,,, stored in side kinda,, 50 bucks for the pair,, with the inner fender wells ,,,couldnt let um sit and get crushed,,,

buses ful of tail lites,,,hub caps,,,there is stuff there,, no real useable sheet metal from the 40/50s cars,,,,,was worth the 2 1/2 hour ride for the memories,,,,

 

 

 

wizard  u get around,,lol thats   my  posting from  A bodies,,lol nice

Posted

Does he still have any 1950's - 1963 Rambler Americans ?

there were at least 2 ramblers,,one was a very late 50s or early 60 wagon,,,wild almost had fins,,,there was also  a 66or 67 classic model,,,and im thinking there was a early 60s  boxy american,,,  im 3 hours away from there,,,not much of the sheet metal is  useable,,,

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use