Oldguy48 Posted May 23, 2012 Report Share Posted May 23, 2012 After a lot of unsuccessful searching, i decided to try another approach for rocker moulding clips for my P15. I had a dozen pieces of 16 gauge stainless steel sheared to 1 1/8" x 2 9/16", and inserted them into the rocker mouldings (the 2 9/16" dimension may need to be trimmed a bit to fit). A bit of tapping with a rubber mallet placed them where I wanted them. The driver's side moulding had the factory mounting tabs, but the passenger side had none. Fashioned a universal type to fit the front contour and JB welded in place, and the rearmost one was attached with a small L-shaped piece of stainless screwed to the piece inside the moulding. All the rest were attached using 3-M double sticky moulding tape. Not factory correct, but it seems to work. Quote Link to comment Share on other sites More sharing options...
OldDad67 Posted May 23, 2012 Report Share Posted May 23, 2012 Photo's? Quote Link to comment Share on other sites More sharing options...
Oldguy48 Posted May 23, 2012 Author Report Share Posted May 23, 2012 Sorry, but in my haste to get the rocker mouldings installed, I didn't take the time to get pics. Quote Link to comment Share on other sites More sharing options...
1flipdog Posted May 24, 2012 Report Share Posted May 24, 2012 restoration specialties windber,Pa. 824 467 9842 Quote Link to comment Share on other sites More sharing options...
Oldguy48 Posted May 24, 2012 Author Report Share Posted May 24, 2012 I tried those folks, and at the time I inquired they were not available. Quote Link to comment Share on other sites More sharing options...
falconvan Posted May 24, 2012 Report Share Posted May 24, 2012 I found them on Ebay but paid dearly; $100 for 10 clips. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.