azmichael1 Posted November 3, 2010 Report Share Posted November 3, 2010 I recently bought a new steering wheel and horn ring for my '48 P-15. Removing the old steering wheel and installing the new one was simple, BUT......I cannot (even after several tries) figure out how to attach the horn to the horn ring assembly so that it honks only when pressed. It has a large spring that goes behind the "t" shaped metal retainer that attaches to the steering wheel itself and the horn wire comes up the middle........ but where (and how) does that wire attach to the horn ring ? Any help will be appreciated. Mike Quote Link to comment Share on other sites More sharing options...
old rat 49 Posted November 3, 2010 Report Share Posted November 3, 2010 It does not attach to the ring itself. It comes out of the little hole at the top of steering column and into a little fitting with a button type end. The horn ring floats above all this on the spring and makes a ground connection when you push on it and it makes contact with the plate on top of column. Quote Link to comment Share on other sites More sharing options...
BobT-47P15 Posted November 3, 2010 Report Share Posted November 3, 2010 (edited) Edited November 3, 2010 by BobT-47P15 Quote Link to comment Share on other sites More sharing options...
old rat 49 Posted November 3, 2010 Report Share Posted November 3, 2010 And if you don't have the battery disconnected it will get real noisy while putting it together. Quote Link to comment Share on other sites More sharing options...
P-12 Tommy Posted November 3, 2010 Report Share Posted November 3, 2010 old rat 49 is right. I found out the hard way once. Scared the crap out of me. Tom Quote Link to comment Share on other sites More sharing options...
azmichael1 Posted November 3, 2010 Author Report Share Posted November 3, 2010 Hey Guys : Thanks for your input on my horn ring installation project............the picture was really helpful and I realize now that I am missing the contact and retainer that go at the end of the horn wire................pretty sure I can devise something that'll work. Does that wire/contact actually go up against the back of the horn button ? Thanks again for your help. Mike Quote Link to comment Share on other sites More sharing options...
49 Dodge Dude Posted November 3, 2010 Report Share Posted November 3, 2010 I'm missing just about everything on mine, except for the horn ring Anyone know where I can buy a kit that would have the whole assembly in it? Quote Link to comment Share on other sites More sharing options...
Young Ed Posted November 3, 2010 Report Share Posted November 3, 2010 I'm missing just about everything on mine, except for the horn ring Anyone know where I can buy a kit that would have the whole assembly in it? Ah the beauty of owning a mopar. For most things there's no such thing as a kit. The only place I know of to get the parts you are missing is a parts car or one of the NOS parts places might have them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.