Charlie Olson Posted July 3, 2010 Report Posted July 3, 2010 (edited) Hi, there is an unknown to me electrical gizmo, attached to my removed, original broken handle cowl vent mechanism. It is a rectangular tube, 5" x 3/4"x 7/8", riveted to a bracket, which is bolt&nut attached to the handle side of the CVM. There is the old time fiber board/cloth wire connection protruding from the firewall facing end of this gizmo. I'll put some pictures of it on here on Tuesday. Being as my heater is now controlled by a single on/off, two fan speed knob/switch and my defroster tubes are attached to the heater with no heater/defroster control levers/cables. I open the heater doors for heater and close them for defrosting; although I haven't done any of that since moving to AZ, from WA. Well, that isn't exactly accurate because I did use my heater and defroster when I got caught in a snow/sleet/hail storm while on the 43rd Annual Route 66 Fun Run, April 29th. My guess is that this gizmo was part of the original heater control system. Any other ideas? HAPPY FOURTH OF JULY!!!!!!! Don't forget my July 4th Photo Contest challenge!!!! Edited July 7, 2010 by Charlie Olson Quote
Charlie Olson Posted July 3, 2010 Author Report Posted July 3, 2010 I'll put up some pictures, Tuesday, when I go back to work; where my downloading capability is. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.