steveplym Posted January 19, 2010 Report Posted January 19, 2010 When I installed my transmission and new driveshaft I had the car jacked up in the rear for a week or so. I had it pretty high so the front wheels were taking a lot weight. Once I drove the car after that I noticed that the right front wheel was in at the top. Camber is off for some reason and I can't tell if something has moved or possibly bent. I can't see anything being visibly bent, but I'm wondering what would cause this kind of problem on the front suspension of a stock P-15? Quote
greg g Posted January 19, 2010 Report Posted January 19, 2010 Jack up the front for a while..........Wonder if maybe you broke a coil. Taking all that weight for a week might have stressed a bit more that it could take at it's age. Quote
Andydodge Posted January 19, 2010 Report Posted January 19, 2010 Maybe the extra load on the front was enough to make the camber adjuster bolt on the upper outer pin or even the bush come loose, thats what i'd check 1st......andyd Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.