glass interchange question

[powerwagon]

will a 1952 plymouth business coupe rear glass fit in a 1950 plymouth business coupe?

[Plymouthy Adams]

NO interchange per model year but I will admit they did not say BZ CP exactly..it is my experience that the shortbase wheelbase cars carried a lot over year to year..especially in the Suburban and Concorde which is part in part the lineup for the BZ CP..I do not have a business coupe here to measure but do do know where a 50 Bz Cp is and could possibily get a measurement...from another site..this is a from a general description of the 49-52 plymouths:

Glass/Windows - The '49 rear window is not as wide as the '50. '51 & '52 rear windows are the same but bigger than on the '50.

to read the entire article on the ins and outs what is different etc...follow this link:

http://www.oldplymouths.com/forums/index.php?showtopic=2

Edited September 6, 2009 by Tim Adams

[JerseyHarold]

I have a '51 business coupe and the 1951-1952 business coupe rear window is the same as the 1950. Some upper rear window stainless trim interchanges as well. The belt molding was different between the 1950 and 51-2.

[Plymouthy Adams]

that is good information..the statement I made in my earlier post about the 111 inch wheelbase cars not changing as much from year to year as compared to the big sister has been pretty much proven..

[JerseyHarold]

The funny thing about the business coupes is that, even though the rear windows are the same 50-52, the roof itself is different for the 1950 because the front windshield is narrower.