Lou Earle Posted January 17, 2007 Report Posted January 17, 2007 I am going to be painting- maybe- If you guys can help me - A set of 15 inch full wheel hubcaps. I plan on painting Not the center but the large part from the edge of the center to the edge. Why? because I have an Ideas on how to make Chevy rims that are on a car I bought- mystery car to you guys now- look like Plymouth rims with dog dish hubcaps So what do I need to do to make paint stick to stainless? Lou Quote
Plymouthy Adams Posted January 17, 2007 Report Posted January 17, 2007 I would use two side tape to protect that area not to be painted..why..it is heavier rubber tape and the media bounces off it more so than eat through. The stainless will get a good foot etched into the material for paint to adhere. Quote
Plymouthy Adams Posted January 17, 2007 Report Posted January 17, 2007 I Know A Secret....!!!!!!!!!!! Quote
Tim Frank Posted January 18, 2007 Report Posted January 18, 2007 http://www.pfonline.com/articles/clinics/0602cl_paint8.html Lou, This offers a few tips. Nothing profound, but it might help. Tim Quote
BobT-47P15 Posted January 18, 2007 Report Posted January 18, 2007 I had a set of these years ago.....They are one piece, but look like small cap with the white ring. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.