window removal question

[pflaming]

How does one remove the door windows? I have the full window style.

[Merle Coggins]

1. Remove the lower inner door panel and roll the window all the way down.

2. Remove the glass bumpers and the cat whisker seal strip.

3. Reach through the lower inner door opening and remove the clips that attach the glass to the regulator.

4. find the 3 screws that run vertically near the front of the door. These hold the front guide. Remove these screws and the guide.

5. Now the glass should slide up and out through the window opening.

Good luck,

Merle

[MBF]

Merle is correct. I've also seen a hammer used, but I don't recommend that! I found one of those circular clips while sweeping up my garage tonight-put it right in inventory for the next time! Mike

[pflaming]

Went and checked the door to find the three bolts and found them, they are a bit apart but the only three on the inside. My door has only one 'plate' to remove. I want to save the window that is intire but can' t get it all the way down. Probably need to clean the track.

I thought the passenger door did not work, but now I think it is locked, yet it does NOT unlock when opened from the inside. Is that how it is or do I have a JAMMED door mechanism. I do not have a key so cannot unlock that way just now. [No outside lock on the driver's door which conformes to earlier information found on the forum.

Thank you for the directions!