Pooshoe Posted August 30, 2022 Report Posted August 30, 2022 Does anyone know the measurements of the release bearing sleeve? My car making squeaking noise so I ripped my transmission apart and found this to be the problem. I hammered the bearing off the sleeve with a copper hammer and the sleeve come out pretty easy seems to have a groove in it like the bearing was spinning on it. I’m pretty sure that was the squeaking noise I was hearing.also does anyone know where I could get the hole assembly if it is bad? I seen one on hilltop auto online but it was $110 not to bad but still more then I want to pay. thanks.? Quote
Pooshoe Posted August 30, 2022 Author Report Posted August 30, 2022 Attached it the bearing sleeve. Quote
desoto1939 Posted August 30, 2022 Report Posted August 30, 2022 Here is all of the info that you need. I have a Federal Bearing and throwout bearing catalog on CD or flash drive that can also tell you the various other company that produced the same units. Rich Hartung Desoto1939@aol.com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.