Navy Chief Posted November 15, 2018 Report Posted November 15, 2018 Does anybody know if the short running boards from a 1.5/2 ton will fit a 1 ton? I found a decent deal on a pair for my project that needs a set.... Quote
Los_Control Posted November 15, 2018 Report Posted November 15, 2018 I would only guess, the cabs would be same, the short boards are cab length, I would say they are the same. The long ones for a pickup bed, the wheel base would come into play. 1 Quote
Navy Chief Posted November 15, 2018 Author Report Posted November 15, 2018 1 minute ago, Los_Control said: I would only guess, the cabs would be same, the short boards are cab length, I would say they are the same. The long ones for a pickup bed, the wheel base would come into play. I was thinking the same thing, the cabs are the same, was not sure about the frame height though.. May require a bit of trimming on the straight part that is along the cab. That would be perfect, cab length is what I need for my stake bed. Quote
Los_Control Posted November 15, 2018 Report Posted November 15, 2018 A photo of my 3/4 ton, they simply end at rear of cab. As far as I know, the front fenders on big trucks are different for the larger tires. But the actual cab did not change, as far as I know. Quote
Navy Chief Posted November 15, 2018 Author Report Posted November 15, 2018 (edited) After looking over some pictures I am not sure, they look like they fit quite a bit differently on the 1.5 and 2 tons... They are lower from the cab and stick out further to match the larger front fenders... Edited November 15, 2018 by Navy Chief Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.