The brake lines are in...

[toddbracik]

The cylinders are all set and its time to bleed em. Unfortunately i am still having trouble locating 3 parts. Does anyone know where I can purchase the following:

7. Piston pushrod end

8. piston pushrod end lock nut

9 piston pushrod.

Any help is greatly appreciated. Todd B.

[Lou Earle]

does anyone know if one from a plymouth will dwork? I have one I can send him

Lou

[vanbuskirk]

He also needs the brake return spring, and the pin, clip, washer and cotter pin that fasten master cylinder push rod to the pedal. Illustrated on page 80 of the P-15 Parts List book. Bob

[toddbracik]

does anyone know if one from a plymouth will dwork? I have one I can send him

Lou

That's a good question. I didn't think there was a difference but Tim Adams pointed out that there could be a difference because of the fluid drive on the Dodge. Does anyone know? Todd B.

[Don Coatney]

I also have some P-15 stuff if they are the same as D-24. Anyone know? The return spring should be available at a good hardware store.

[Norm's Coupe]

The MC is the same for all Mopars. I have a new in the box MC with remote fill that I bought off ebay several years ago. The guy had it listed as a 54 Chrysler MC with remote fill setup. In checking the NAPA book (was a NAPA brand MC) it showed the MC fit all MOPAR cars from 46 -54. Based on that, I would think the parts are also interchangeable inside the MC, if someone has one laying around.

The NAPA book did not have a different MC for fluid drive cars.

[Tony_Urwin]

http://cgi.ebay.com/ebaymotors/Master-Cylinder-Kit-Chrysler-De-Soto-1942-54-Vintage_W0QQcmdZViewItemQQcategoryZ10076QQihZ013QQitemZ230166974739QQrdZ1QQsspagenameZWDVW

[toddbracik]

Thanks for all your help up to this point guys. I need to cross reference these parts to make sure they are the same ones and I don't have $50 to buy a 48 d24 parts manual right now. The parts I need are unfortunately not included in a rebuild kit.

Thanks in advance. Todd.

Oh and I think I found a return spring that'll work. Won't know till I have all the parts to put it together. Had to buy a $15 kit but at this point...