Quartz Clock Conversion

[dcutte07]

I've recently converted the clock to quartz, but the clock guy cant seem to get it right. The clock keeps grounding out to the case when mounted to the dash. Is there anything I can pass along to the clock guy he should know. Thank you. This is going in a P-15 6 volt Pos Ground.

[Plymouthy Adams]

does he under stand the + ground...?  ask him to full isolate the movement if nothing else and leave the +/- wires marked and dangling...

[dcutte07]

Thanks Adams, I solved my own problem. It was me. I understood +ground but didn't apply it to the clock. Problem solved.

Thank you