can47p15 Posted November 14, 2017 Report Share Posted November 14, 2017 i need to replace a cracked intake manifold on my Canadian P15, with the 25 inch block. napa part was tiny, so obviously must be for the US version 23 inch block. would i need to order a manifold set for a chrysler instead to get the right parts? my engine was rebuilt years ago and the shop obliterated the engine code. however my 2 spare blocks are the same, with one a D25C and the other appears to be D40S. i am stealing the manifold from the D40S which is a "high" casting at the carb mount, and my old one was a "low" casting. will swap my aircleaner with a lower profile unit to suit. anybody got a napa or felpro part number for the manifold gasket set for the 25 inch block? 1 Quote Link to comment Share on other sites More sharing options...
greg g Posted November 15, 2017 Report Share Posted November 15, 2017 In your case, I would order Chrysler parts for 25 inch block. Quote Link to comment Share on other sites More sharing options...
can47p15 Posted November 20, 2017 Author Report Share Posted November 20, 2017 OK folks, for those of you searching, the part number i got which fit my engine is "Felpro MS8583B" the only issue with the set is you will need to find a carb base and exhaust pipe flange gasket separately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.