window and door parts?

[bosworth]

I am finally at the point in the restoration of my '52 B3B pickup where I need to gather up the parts to reassemble the doors and install the glass.  I am putting a shopping list together and a little confused as to just what I need.  As far as I can tell I need;

1  8' piece of window sweeper

1 8' piece of window channel (is this enough?)

6 sweeper clips

1 set of vent window rubber seals

4 window bumpers

1 door weather strip kit

1 sill seal (kit)

I think I need a pair of Division bar channels, although I'm not sure what these are. Are these the channel guides that are down in the door that line the window up with the vent window?

what do I use as a seal on the metal front edge of the side windows where they seal to the vent window?

I'm planning to order all of these (and a bunch of other stuff) from Roberts.

I appreciate you input and experience with this project

Bill

 

 

[NiftyFifty]

If you order from Roberts they will already sell you the lengths/amounts you need.  Only thing they messed up for my order was the window run clips were wrong, and not quite enough too fender rubber seal that runs under the hood.

[ggdad1951]

If you call up Gary, he'll get you what you need.   Look in the parts book and you'll see all the stuff you need.