Jump to content

Recommended Posts

Posted

Hello all,

My 1951 Wayfarer is still 6 volt and has factory directionals but someone has done some rewiring: they replaced the rear sockets and wire-nutted the old and new wires together. The left turn lights work fine but the right ones stop clicking when the brakes are applied. Where should I start looking?

Thanks for your thoughts.

Fred

Posted

A bad ground will cause the symptom you describe.  Clean and check all of the connections and the ground connection to the right light socket. 

  • Like 1
Posted (edited)

Busy coupe has it right.  The tail light inner housing relies on bolts from the back to hold it in place and provide a ground.  A quick fix is to remove the lens and drill a small hole through the back and insert a self tapping screw which will bite into the metal of the fender.  A better fix is to run a ground wire and secure a ground in the trunk compartment where moisture should not be a problem.

Edited by dpollo
spelling error

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use