Jim Yergin Posted July 26, 2007 Report Posted July 26, 2007 I know I can get a replacement ring gear from VPW but I wondered if anyone might have an extra 146 tooth ring gear they might be willing to let me have. Thanks. Jim Yergin Quote
Plymouthy Adams Posted July 26, 2007 Report Posted July 26, 2007 I believe you have a few extra teeth in that figure... Quote
Jim Yergin Posted July 26, 2007 Author Report Posted July 26, 2007 Tim, My information says there are either 146 or 172 (later models) teeth ring gears. How many should there be? Thanks. Jim Yergin Quote
Plymouthy Adams Posted July 26, 2007 Report Posted July 26, 2007 excuse me..I had a serious problem reading..was thinking you were referring to the ring gear in the rear end and had a typo...accept my apologies please.. My newest "old" parts book show it to be 146 as you stated for Dodge D24 through the 47 year as this is the date of my book. Carries two part numbers..1119 993 and then the 11" clutch had part number 1120-632 both have the 146 count, 14.268 ID and the OD of 14.640 I have no idea if this is same/different for a Plymouth..I don't have a P15 book. Quote
Jim Yergin Posted July 27, 2007 Author Report Posted July 27, 2007 Tim, Thanks for the info and confirming that I am looking for the right part. I think it is the same for Plymouths. I am trying to replace the 172 tooth ring gear that is on the flywheel I found to use in my D24 230 rebuild with the starter in my 1941 P12. Jim Yergin Quote
Plymouthy Adams Posted July 27, 2007 Report Posted July 27, 2007 Jim..I have sent a PM in regard to this subject. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.