41 Plymouth door bottom seal

[rockable]

What kind of seal is used to seal the bottom of the door in my P12 Coupe? Does anyone know of a source or a substitute? Anybody got pictures?

 

Thanks for your help!

[chopt50wgn]

I had a hard time getting rubber seals to fit on my 50 Ply wagon. I ran across a guy at Carlisle who had a universal fit rubber and it fit everywhere and sealed nicely. The best part is it is self adhesive. It's made by Vintique Inc. The part muber I used is HR-701980-L. It comes in a 20 ft. roll. If you type in that number in a search you can find it.

[rockable]

Thanks! Will check it out!

[junkers72]

I'm in the same situation with my 41 2dr sedan. It appeared to me when I got to cleaning up that area of the car that there was a rubber strip hanging down about 1" to 1 1/2" from between the door and the lower door panel. It sealed against the aluminum sill that retained the rubber floor mat. Rubber glue on seal was on the door front to rear from lower front corner, over the top to lower rear corner,but not any trace of that type along the bottom.