218/230 exhaust/intake manifold

[Devon]

New here, I have a 51 Cranbrook with a 218 with a broken exhaust and intake manifold. The exhaust manifold is in 2 pieces, intake manifold has mounting tab broken off. I can see if they can be welded but being the exhaust is broken in 2, I'm thinking it may be difficult to get it true again. 

any thoughts?

i would like to keep it factory, ive been searching online for a pair but all i can find is performance setups. exhaust dumps between 5 & 6. Does anyone know of a vendor or place to get ahold of an oe pair of manifolds?

 

thanks

[plymouthcranbrook]

Try these guys:

http://www.mooresautosalvage.com/default.asp

http://www.allamericanclassics.com/

http://www.wildcatmopars.com/

Edited September 27, 2016 by plymouthcranbrook

[Andydodge]

Welcome to the forum..............there are at least 3 different Plymouth exhaust manifolds.......a front dump between # 2 & 3, a rear/centre dump between # 4 & 5 and a rear dump that dumps after # 6.......  I used one of each of the first & second type to have a twin outlet system made to suit the engine I was building.........I had the cut off openings welded by a local blacksmith who knew how to weld cast iron.........anyway hope this helps........andyd