Fargone Posted August 9, 2016 Report Posted August 9, 2016 I checked the old posts and couldn't find any information on pulling the steering column out while leaving the steering box in place. Is this even possible? Or should I just yank the steering box and column as a unit? It seems like they should separate at the column, but maybe the steering box has an internal connection as well? Any guidance would be helpful here, thanks in advance. Quote
Solution Fargone Posted August 9, 2016 Author Solution Report Posted August 9, 2016 I checked the old posts and couldn't find any information on pulling the steering column out while leaving the steering box in place. Is this even possible? Or should I just yank the steering box and column as a unit? It seems like they should separate at the column, but maybe the steering box has an internal connection as well? Any guidance would be helpful here, thanks in advance. Sorry guys just found information on-line in Aussy service manual the whole unit has to come out. Quote
Charlie Stephenson Posted August 9, 2016 Report Posted August 9, 2016 Good information to have. Thank You Quote
JBNeal Posted August 10, 2016 Report Posted August 10, 2016 steering gearbox service and installation 1 Quote
MBF Posted August 11, 2016 Report Posted August 11, 2016 I removed mine by removing the steering wheel, horn wire, undoing the dash hanger, frame mounting bolts and drag link. With the front end jacked up and front suspension hanging I was able to simply slide it out the bottom. Installation of the replacement box was just to reverse the process. Didn't need to touch the floor panels or anything else. Mike 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.