Front fender moulding 1954 Savoy

[fudds54]

Is the front fender stainless moulding the same on both the front fenders. I have found a piece the ad says for left or right mine is dented pretty bad just eyeballing it looks the same on both sides to me. Just want to make sure before I purchase.

It is the strip that runs along the side of the fender.

[plymouthcranbrook]

Fronts are generally interchangeable as are rears. Just not front and rear.

Edited April 11, 2016 by plymouthcranbrook

[dpollo]

my parts book for P25 -2 (Savoy) and 3  (Belvedere) shows  pn 1541024 rhs and 1541025 lhs.  fender side moulding

 

this would suggest they are different and as I recall, they are. It took me years to find a rhs moulding before internet.

[fudds54]

Thanks Guys!

[BobT-47P15]

Well......another way to look at it........if they are not too different ......  you could use a right on the left, upside down, as better than nothing until you actually find the

exact part needed.  Who knows how long that may take..........and is the car needing a lot of repair, or is it ready to use now?   Remember, most members of the

general public will probably never notice that you have an incorrect piece of trim.........just one of my observations from years of messing with some old cars.  (I realize

not everyone will agree with me.)

[rb1949]

Since you're replacing, take it off and hold it up to the other side. The process may also reveal if you need new clips.