1941 chrysler c28 throttle return spring and bracket install

[41chysleRoyal]

In Need of a pict. Of throttle spring return bracket. I took pictures as i took apart the engine for paint and dont seem to have one of how it mounts back up. I thnk it mounts to one of the oil filter brackets studs, closes to firewall? Before the oil can bracket or after? Orientation?

[Roadkingcoupe]

possibly mounts on the head bolts.

[Don Coatney]

This might or might not help. Later model Crashlers.

 

 

[41chysleRoyal]

Thanks a bunch , greatly appreciated. but on my engine its a lil different setup.

[41chysleRoyal]

[41chysleRoyal]

This is mine if you can make it out .

[JD luxury liner]

pictures of a 41 Dodge d19

 

Edited March 9, 2016 by JD luxury liner

[Ricky Luke]

Have a look at the Online Imperial Club http://www.imperialclub.com/Yr/1942/42Ebay/1942ImperialLimo39.jpg. it's obviously an 8, but I suspect the linkages will be similar. At least it might jog your memory.

 

Cheers

 

Rick

[41chysleRoyal]

Thank you rick and jd , jd's pict shows the exact throttle assembly and shows spring but doesnt show the bracket that spring hooks to and where it bolts up at.

[40phil41]

I knew that I had a pic around somewhere and I finally found it. Not perfect but you can see that there is a bracket (which bolts to the rear oil filter bracket bolt) that the spring is attached to. The bracket is just in front of the block welch plug. Hope this helps.

 

Phil

 

[41chysleRoyal]

Phil, thats the one and where i had put it just wasnt sure, cause it felt like the tension was a lil more than before . Guess it was all in my mind. Thanks alot for all the help i received.