3046moparcoupe Posted December 26, 2015 Report Posted December 26, 2015 (edited) In cleaning up my clutch linkage and comparing it to the OEM parts exploded view diagrams, I am in need of purchasing the following parts: (1): the small flat bracket that anchors the spring the connects to the clutch fork..... part # 952 585 desc: Clutch release Fork Pull Back Spring (2): the spring that attaches to the above brkt and to the clutch fork,.... part # 626 220 desc: Clutch Release Fork Pull Back Spring ###note### also, If someone has this bracket, but don't wish to sell it, if they could provide an outline tracing or the dimensions, I should be able to work from that and make it. (3): Looking for rear motor mount hardware, especially the spacers (tube and washer assy). Both the above needed parts are for/from a 1946-1948 Plymouth 218 flat six, 3 speed manual.. Thank you Steve Gentry #817-590-9716 email : seguitar1@yahoo.com Edited December 26, 2015 by 3046moparcoupe
Jedrattle Posted January 2, 2016 Report Posted January 2, 2016 If you're not in a big hurry for those parts, I'll have the parts available in mid to late February
TodFitch Posted January 4, 2016 Report Posted January 4, 2016 Please post this in the classified section rather than the forum.
Recommended Posts