Guest gdaddypaul Posted January 3, 2015 Report Posted January 3, 2015 How di I safely remove the black "button" to get at the horn rim? Thanks, folks! Quote
MBF Posted January 3, 2015 Report Posted January 3, 2015 (edited) Push it down and I believe you turn it clockwise. Don't force it or you'll break one of the ears off. Edited January 4, 2015 by MBFowler Quote
Jerry Roberts Posted January 4, 2015 Report Posted January 4, 2015 Yes , clockwise is correct . Quote
Guest gdaddypaul Posted January 7, 2015 Report Posted January 7, 2015 Thanks, folks... I'll give it a whirl (pun intended..bwahaha!) Paul Quote
Geekay Posted January 8, 2015 Report Posted January 8, 2015 Thanks, folks... I'll give it a whirl (pun intended..bwahaha!) Paul I need to do the same with my '53 horn. Did this work? Easy? BTW..I love the size and design of the horn....can't wait to hear it. Hope it lives up to my expectations of a decent blast!!! Quote
ggdad1951 Posted January 9, 2015 Report Posted January 9, 2015 Remember M*A*S*H jeeps? There ya go Quote
HanksB3B Posted January 11, 2015 Report Posted January 11, 2015 (edited) I need to do the same with my '53 horn. Did this work? Easy? BTW..I love the size and design of the horn....can't wait to hear it. Hope it lives up to my expectations of a decent blast!!! Don't worry. It won't. Unless you love the Roadrunner from Wiley Coyotemeep meep. Hank Edited January 11, 2015 by HanksB3B Quote
Guest gdaddypaul Posted January 16, 2015 Report Posted January 16, 2015 Got it! Tried and tried to remove just the "button" without success. Then, I took hold of the horn ring and a gentle twist, clockwise, and off it came! Since the horn didn't work, anyway (I think one of the prior owners must have replaced the original with the double trumpet one... controlled by a "strap-on" button installed on the steering column... that's on the truck, now), I'm saving the rim and all and have filled the center of the wheel with a wood button I made which has "Tonka" carved into it. I now call my truck Tonka since a fellow car nut commented that it looks like one of the old toy trucks of that name! I'm sure some (maybe all) of you have heard the same thing but it really tickled me because its SO true! Of course, I'll save the stock setup but, for now, it makes me smile! Quote
Geekay Posted January 27, 2015 Report Posted January 27, 2015 It is off and now working after being cleaned (full of grass seeds etc). But is doesn't go Meep Meep ...more of a sick honk. Jeff said in another post about my fuel pump the sound can be adjusted to get the required Meep Meep..so will do that. Quote
ggdad1951 Posted January 28, 2015 Report Posted January 28, 2015 The horn contacts might need cleaning and or adjustment Quote
MBF Posted January 28, 2015 Report Posted January 28, 2015 (edited) Here's a couple of things to try. Make sure that you have a good ground on your steering box and tube that covers the shaft. There should also be an 8 sided bolt on the back of the horn itself that lets you adjust the tone and volume. Maybe an insect built a nest against the steel disk inside. Try tapping the bell with the horn upside down and see if anything comes out. You may want to check and make sure that someone hasn't put a 12v horn in there-that'll never give you the kind of meep-meep you're looking for if you're running a 6 volt system. I've got the 6 volt horn on my 1 ton that I converted to 12 volts. Now that's a good strong MEEP MEEP! Edited January 28, 2015 by MBFowler 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.