Love for the '55's?

By 4msfamly
July 26, 2011 in Mopar Flathead Truck Forum

Followers 0

Recommended Posts

ruff1148kr

Posted December 23, 2014

- Report
- Share

Posted December 23, 2014

Lots of great help on this website what ever way you pick good luck did the 360LA/727 myself on original frame the frame swap seams like the easy way to go just take your time picking out which way you want to go and consider where wheels will be in the wheel wells have seen a lot that are too forward or to far back and does not look correct.

Quote

Link to comment

Share on other sites

Popular Days

Popular Posts

ggdad1951

September 21, 2011

I used a screwdriver that I shoved in the hole I drilled....but you HAVE to get it UNDER the cap and between the cap and the king pin, it should then just pry out. If it was over seated it might be i

ggdad1951

September 23, 2011

don't know if you'll be able to drill it out. I *think* they are hardened. It should press out with a little help. make sure to get the kit with the brass, I think they have a kit with plastic.

4msfamly

February 28, 2012

Well, we're still at it. School is (rightfully I suppose!) taking A LOT of my daughter's time, so it's been a slow process of work. To date, we rebuilt the kingpins, and found new a new pitman arm o