p24-1953 Posted December 20, 2009 Report Posted December 20, 2009 as i upgrade to my overdrive transmission, i will need to shorten my driveshaft. what would i need to do upgrade to a modern style driveshaft while im at it. is this a part that can be bought at someplace like summit. who would yall reccomend to shorten a driveshaft and what should i be expecting to pay just to shorten the driveshaft, and what does it cost to upgrade it? Quote
D25_Owner Posted December 20, 2009 Report Posted December 20, 2009 Try a local driveline shop. I have paid $45-$95 for cut & balance. Quote
Plymouthy Adams Posted December 20, 2009 Report Posted December 20, 2009 got a shop right there in downtown Macon...do it all right on the spot for you..reasonable... Quote
p24-1953 Posted December 20, 2009 Author Report Posted December 20, 2009 who? thanks for the lead Quote
Plymouthy Adams Posted December 20, 2009 Report Posted December 20, 2009 (edited) pm sent...before you go to the shop with your old shaft, do you know how much to take off to ensure proper lenght for the changes the driveshaft will face in operation..this is critical.. Edited December 20, 2009 by Tim Adams Quote
blueskies Posted December 21, 2009 Report Posted December 21, 2009 Here's what I did to convert my driveline to modern joints... There's part numbers for the adapters and stuff you will need, in the link above. Pete Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.