1949P17BC Posted January 28, 2007 Report Posted January 28, 2007 what are the steps needed to get the door glass out of a 51 Pick up. Have removed all of the regulator, door handle and obvious screws. Glass has dropped down, but cannot find how its connected to the regulator (little to no access) Quote
Merle Coggins Posted January 28, 2007 Report Posted January 28, 2007 On mine there are clips on the back side of what the call the rollers. It's actually just a pin that slides in the slot along the bottom of the glass. Reach around under the regulator and glass and slide the clips off of the pins. As you say, there's not much room to work, but once you get the clips off, the glass will come out through the top. You'll have to remove the 2 rubber bumpers on the inside door lip to get it out. Good luck. Quote
Guest Dave Claussen Posted January 29, 2007 Report Posted January 29, 2007 A small hand held inspection mirror and a small flashlight will give you a look at the direction you need to push the clips to remove them. They won't necessarily be positioned in the same direction when you try to remove them. Worked well for me when I disassembled my doors. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.