David Muma Posted August 8, 2008 Report Posted August 8, 2008 Are the studs in the 1 ton hub swedged in or can they just be pressed out.... also can the hub and drum be separated.... I have looked at several shop manuals and there is very little information.... any assistance will be appreciated. Quote
Merle Coggins Posted August 8, 2008 Report Posted August 8, 2008 I agree, my shop manual doesn't show it very good either. I also looked in my parts manual. It appears that the wheel studs also hold the drum to the hub. Press out the studs and the drum should seperate. Merle Quote
MBF Posted August 8, 2008 Report Posted August 8, 2008 I pressed the ones out on the left rear of my 1 ton. I did them 2 at a time but I didn't need to separate the drum from the hub, but I imagine if they were all removed at the same time that the two pcs would separate. Good luck. Mike Quote
Guest Kuster13 Posted August 8, 2008 Report Posted August 8, 2008 Yes they do seperate once the studs are out. Tom Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.