nr1freak Posted December 26, 2023 Report Share Posted December 26, 2023 (edited) Hi all! So i bought a 51 Dodge from a guy that also bought it from a guy who probably also bought it from a guy... long story short, it's been sitting idle for at least 5 to 10 years and i want to flush out the (Gyromatic) tranny and fluid drive so i know i'll start off with the right fluids (i'm thinking 10W for the tranny and ISO32 for the fluid drive) because lord knows what they put in it... how do i properly clean them out without taking them apart? i heared something about draining the tranny, put in some Kerosene and drive around the block? (sounds sketchy tbh) but what about the fluid drive? just fill it up and let is sit for a minute before draining again? maybe start the engine for a few seconds? thx! Edited December 26, 2023 by nr1freak Quote Link to comment Share on other sites More sharing options...
D35 Torpedo Posted December 26, 2023 Report Share Posted December 26, 2023 You're over thinking it. Drain and fill. Whatever is left will be very dilute. Not sure about the fluid drive, but ive had good luck with GM synchromesh in the trans. Quote Link to comment Share on other sites More sharing options...
Doug&Deb Posted December 26, 2023 Report Share Posted December 26, 2023 For the fluid coupling Mobil DTE light circulating fluid ISO32. For the transmission AW32 hydraulic oil works well for me. The Mobil fluid is available from Grainger and isn’t cheap but has been verified by another forum member as being correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.