Rocker Molding clips

[bartenderfloyd]

I just bought rocker molding clips off ebay here (https://www.ebay.com/itm/173592661249?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Dd120076aeafd4bfba1f6fafaf62d363c%26pid%3D100675%26rk%3D3%26rkt%3D15%26sd%3D322984935790%26itm%3D173592661249%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Abf5ad498-80a6-11ec-b007-9e122ad8ba98|parentrq%3Aa38ccb9717e0adb9dadb57d4fffd7934|iid%3A1)  I'm having trouble figuring out how to install them as they are slightly different from the old rusty ones on there now.  Do I install them like the one on the left in the pic below or like the one on the right?  I included an old rusty one for comparison but I don't remember how that one was attached.  Second question, do I attach them to the car first and slip on the molding or attach them to the molding and screw them in from the inside of the rocker? 

 

[Mino Diaz]

Floyd,

Just read your posting on the chrome rocker panel molding clips.  I own a 1948 Plymouth Special Deluxe.  My current issue is trying to take off the molding

without messing up the paint.  I want to re-chrome the trim.  Can you tell me how it came off for you.  I am also going to buy new clips so I will be taking 

special notes on how it was attached. Which of the three photo's was the correct one for you?

Special Thanks

M. Diaz

Email is the best contact: minodiaz@hotmail.com

[Conn47D24]

I mounting the brackets to the car, then attach the moulding .

 

Hook the mounding to the bottom hooks, then push the top until it snaps on.