Conn47D24 Posted June 7, 2019 Report Posted June 7, 2019 Another step done today. Completed installation of the clutch pedal - linkages. Free play and clutch release all looks-feels good. The correct Miller tool C-705 came in handy and easy to use. Fits over the two pivot pins and you adjust the turnbuckle until the notch in the end of the tool fits over the spring bracket on the frame. Tool template in this site's downloads will do the trick as well. Quote
casper50 Posted June 7, 2019 Report Posted June 7, 2019 I built the tool from the download. I don't think that I got it quite right as it didn't work as I expected it to. Got it done though. Quote
Conn47D24 Posted June 7, 2019 Author Report Posted June 7, 2019 casper50, After having the entire pedal-linkage assembly apart, I was happy to just get it close. But the tool was easy. Crossed another item off the list ! Quote
casper50 Posted June 7, 2019 Report Posted June 7, 2019 It took me quite a few times to get it near correct. Mine was completely apart as well. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.