front brake lines

[garyanna2]

I have the rusty hope disks on and the front end is now rebuilt. I did not think the front brake hoses would be a problem, how do i go about putting the brake end through the frame? Do i drill out the whole larger to allow the hose to rest the clip at the frame  and use a washer on the inside between the fitting and the frame allowing me to tighten the brake line to  the fitting and the rubber line on the disk side. Maybe i am over thing this. How did anyone deal with this.

[Don Coatney]

This might or might not help.

 

[garyanna2]

Thanks Don that looks like that will work for me. I am dreading addressing the engine i bought back east, one cylender  has 0 compression been soaking it with light oils for a month just to get 30 lbs. ARG!

[lonejacklarry]

https://www.speedwaymotors.com/Stainless-Thru-Frame-Brake-Line-Fittings-2-1-4-2-3-4-Inch,36844.html

 

This is the easy way.  Look around for various sizes.

[garyanna2]

Thanks very much for the info.