Front spring bushings

[garyanna2]

Work has started on some changes first the kingpins are removed and waiting for them to arrive.  My question is on the front springs and bushings. Who caries them Napa and O Riley does not have them, then on to Rock auto I did not find then online. How can you tell if the bush can be reused? The lower one on the pass side has a crack and looks as if something hit against it shearing the grease zurk.  That one is out Im looking for flat spots or wear, or just replace them all anyway.?

 

 

 

 

 

 

       

[Brent B3B]

Gary, did you look at "vintage power wagons"?

i am lucky, Oregon auto spring company had mine when I needed them.

i replaced the ones that were cracked or "egged" out

hope you get what you need..... 

[garyanna2]

Thanks for info, i need to read my post before i post a question. I sounded like i hit the bottle before my question. Thank you Brent for reading between the lines.

[gramps1951]

my new front springs came with the bushings already pressed in.

[Brent B3B]

It's the ones on the frame that were cracked and egged out on my B3B.i also had to replace the frame bracket on the passenger side (13-53-17) http://dodgepilothouseclub.org/know/ph_parts/b_13.pdf

that was a chore.... 

 

 

 

 

[garyanna2]

Thanks Brent i will check that.

[garyanna2]

I found them at Roberts motor parts left and right hand at 41.00 each shackles and bearings. DCM also.