46plymike Posted January 30, 2018 Report Posted January 30, 2018 Hi all, so I purchased my coupe as a basket case. Cab, chassis etc. And putting together is a big fun puzzle. But sometimes a snag. The heater is a comfort zone; core ,blower assy. with the hose attachment piece. It appears to be missing something because it doesn't match up with the firewall holes and I have no water flow controls. Any insight would helpful. Pictures too. Thanks,Mike Quote
dpollo Posted January 31, 2018 Report Posted January 31, 2018 There were many heater options available. In 46 to 48 Comfort Master was popular (models 503 and 504 as I recall.) also many aftermarket heaters were available. Some did not have water controls except for a shut off usually mounted at the rear of the head. Quote
palmersparts Posted January 31, 2018 Report Posted January 31, 2018 Dpollo is right some of those models didnt have flow control valves you adjusted the heat with fan speed and the window crank.. 1 Quote
Reg Evans Posted January 31, 2018 Report Posted January 31, 2018 If the heater core pipes don't match up with the holes in your firewall it sounds like the heater you are working with was never installed in your car. Photos would help a lot. Quote
46plymike Posted January 31, 2018 Author Report Posted January 31, 2018 Sorry,should have mentioned that is was a comfort zone. The cores hose connection were all mangled so I repair them by soldering new tubes from an old core I had hanging around. So i could heat and bend them to fit the existing holes but i dont see any evidence of holes for the 2 mounting brackets attatched to the back.,Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.