TomP Posted July 26, 2020 Author Report Posted July 26, 2020 The cabin will be a long way from stock but the rest will be as original as I can make it. 1 Quote
TomP Posted August 4, 2020 Author Report Posted August 4, 2020 Looking for a bit of advice, finally got the cab anchored down as it should be but have realised that I haven't put the Clutch and Brake pedals on the shaft. Will I be able to fit the pedals without lifting the cab.and will I be able to fit the woodruff key for the clutch. Thanks Tom Quote
dcotant Posted August 5, 2020 Report Posted August 5, 2020 I was able to do this, as long as floor boards were still out. But i am speaking from my experience with 49 not a 41. For the woodruff, i stuck on shaft and then slipped the adjustment yoke over that. Was enough room between the frame and the end of the shaft to do this. 1 Quote
PT81PlymouthPickup Posted August 5, 2020 Report Posted August 5, 2020 23 hours ago, TomP said: Looking for a bit of advice, finally got the cab anchored down as it should be but have realised that I haven't put the Clutch and Brake pedals on the shaft. Will I be able to fit the pedals without lifting the cab.and will I be able to fit the woodruff key for the clutch. Thanks Tom I've had the pedals out a couple of times on my 39 which is same as your 41. Like dcotant says; floor boards have to be out. 1 Quote
TomP Posted August 5, 2020 Author Report Posted August 5, 2020 Just a couple of pics where I'm a, Thanks dcotant & PT81PlymouthPickup for your speedy replies, got on my back on the crawler board to have a look and yes like you say, no problem. I,m no bodyman, my eyes are past their best but I'm pleased with the results 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.