'51 B3B 218 w/ #2 piston no compression

[Jason_T]

Hi everyone - looking for feedback on my recently acquired '51 B3B pickup. Not sure the last time that it had run - but on compression test the #2 cylinder I'm getting nothing from (absolutely 0). the others are all around 85 to 110 PSI. Looking down the spark plug hole I do not see anything moving when I crank over the engine (which I presume I'm looking at the cylinder? v's a valve)

Depending on costs to repair I'd be tempted to switch out to another frame / engine combo - but checking in to see if I missed something easy / cheap to fix

 

thanks,

Jason.

 

[Don Coatney]

When you look into the spark plug hole you are looking at the intake valve. No movement indicates a stuck valve. Suggest you remove the head for further inspection. Also suggest you purchase a service manual for your truck.

[The Oil Soup]

You might pull the valve covers and have a look there.

[Jason_T]

Thanks for the feedback - and yes  - I've got the Shop Manual.