waheed1969 Posted July 23, 2014 Report Posted July 23, 2014 Can anyone help with the piston to bore clearance on a 1948 218 engine please? Quote
48mirage Posted July 23, 2014 Report Posted July 23, 2014 I don't have the '48 info but I've got the piston clearances for the '49 to '52 230 cu in engines. I don't think they would be any different. They are .0015 - .002 Quote
waheed1969 Posted July 24, 2014 Author Report Posted July 24, 2014 This is great thanks guys!! Also, I have the two piece bolt on main rear seal. Any solution if there is too much clearance between the seal and the crankshaft neck? visibly there is no wear on the crankshaft but I have purchased 2 Fel-Pro seals for this crank (230 or 218 engine) and they just dont seem to be a tight fit. I still have an oil leak Quote
james49ply Posted July 31, 2014 Report Posted July 31, 2014 I spent a full day replacing the felt with the rubber, no go still leaks, will go back to the felt when weather cools off. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.