Clutch spline size

[_shel_ny]

I have a clutch disc that was tagged as Plym/Dodge 48-51 when I bought it. Also marked 48-52.

 

I bought it for my car, but the center spline is too big.

 

10" disc.

 

It is a 10 spline, and measures 1-3/8".

 

I would like to know is this fits the trucks.

 

I want to offer it up in the classifieds section, but I would like to confirm what it is first.

 

Any help would be appreciated. Trying to clear some shelves.

[desoto1939]

I think the clucth spline is 10 by 1 inch for the cars.  This might be for a heavy duty truck.  I will try to look in my Clutch book to see what the Borg&Beck has these specs.  This might take some time but if someone can answer the question then I might also beable to verify it via the book.

 

Rich HArtung

Desoto1939@aol.com

[_shel_ny]

Thanks

 

My fluid drive clutch was 10 spline  1 1/4" (Measured where shown in pic.)(9 1/4" disc)

Edited March 31, 2014 by shel_ny

[desoto1939]

I did some quick research in my Borg Warner Clutches catalog.

 

the 10 - 1 3/8 fit mostly the Chrysler Industrial Engines

59-60  30,931

59-60 30,931

55-56 30,31,931

This not the entire list but if you have an industrial engine this might work for you. Let me know what engine and I will try to verify

 

Also

Dodge Truck:

55-56 1 1/2 ton  c356, c3g6, c3fn6,c4fn6,c4g6

48-49 1 1/2 ton

41-42 1 /2 ton WF models

More than I want to list but again if you have one of the bigger trucks I can scan and send you the lisiting.

 

This is why I have been collecting the catalogs over the past several years.  These old catalogs are disappearing and then the information is lost.

Rich Hartung

Desoto1939@aol.com

[_shel_ny]

Thanks Rich. Looks like it will fit some trucks.

 

No engine, just a part picked up by mistake.