MBF Posted September 21, 2012 Report Posted September 21, 2012 I've got a leaky front whl cyl on the 2 ton that I just bought. Does anyone know what size bore(s) these are? Going to try a rebuild if not badly pitted. The truck was sitting inside in storage for a long period of time before I bought it. Also-does anyone know of a source for the large sized master cylinder fill cap? Mike Quote
morgoon52 Posted September 21, 2012 Report Posted September 21, 2012 I just got my two ton last week, so I haven't even had a wheel off yet. The PO supposedly did a brake hone and reseal a while back I have the fill cap and could take some pictures, and measurements if that helps Let me know if you find a rebuild kit for the master, as that is my next project, once I get this starter issue sorted Quote
MBF Posted September 21, 2012 Author Report Posted September 21, 2012 The master looks just like the one on my 1 ton so the rebuild kit may be the same. The two ton has a vacuum booster that has just been replaced, and supposedly the rear wheels were done too. I'm hoping the front whl cyls are the same as the 1 ton. I've got spares from the recent replacement I did on the 1 ton. I'll send them out to have them sleeved if they are. I just need a cap. Mike Quote
wallytoo Posted September 21, 2012 Report Posted September 21, 2012 mike, the front wheel cylinders on your 2-ton should be the same as the rears on your 1-ton. (as long as your 2-ton is '52 or earlier). Quote
B1B Keven Posted September 21, 2012 Report Posted September 21, 2012 Here are some '52 1 ton rebuild kits. Might work for the fronts? http://www.hagensautoparts.com/1952/DODGE+-+Truck/B3F+1ton%2C+1-1%2502F2ton+Light+Duty+236.6-6cyl+128wb%2C+152wb/BRAKE+-+Cylinders%2C+hoses%2C+kits+%26+shoes/All/ Quote
MBF Posted September 22, 2012 Author Report Posted September 22, 2012 Thanks guys. The fronts are the same as my 1 ton. I opened it up yesterday 1 1/4" and 1 3/8" cups. I'm hoping the rears are the same. On my 1 ton, the lefts were the same p/n, and the rights were too. The only difference I see is the orientation of the larger cylinder bore to the rear on both sides-so the lefts are the mirror images of those on the right side. Mike Quote
wallytoo Posted September 22, 2012 Report Posted September 22, 2012 Thanks guys. The fronts are the same as my 1 ton. I opened it up yesterday 1 1/4" and 1 3/8" cups. I'm hoping the rears are the same. On my 1 ton, the lefts were the same p/n, and the rights were too. The only difference I see is the orientation of the larger cylinder bore to the rear on both sides-so the lefts are the mirror images of those on the right side. Mike the rear cylinders are not the same as the one-ton. they are larger. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.