1948 dodge doors

[coupedude]

I HAVE 2DR COUPE WHAT DOOR CAN I USE TO REPLACE ONE. ARE THERE ANY OTHER MODELS THAT WILL FIT THE CAR THXS IN ADVANCE DARIN:cool:

[Gary Manes]

The 1946-1948 Dodge, Desoto and Chrysler coupe doors are interchangeable.

From the firewall back all three brands used many of the same body panels. The only thing that gets tricky is the Chrysler New Yorker which started using Goodyear Supercushion tubless tires in mid 1947; requiring a wider fender. After that you have to know which Chrysler (rear) fenders you have. The Windsors continued to be interchangeagle, but only the non-tubless New Yorkers were after that.

Maybe a little too much info, but you may need more parts later.

Good Luck!

[coupedude]

so if i have a businessman coupe, which i do ,the only replacement door are going to need to come a the same type model 46 thur 48 business coupe just trying to learn as go along thxs:)

[Frank Elder]

so if i have a businessman coupe, which i do ,the only replacement door are going to need to come a the same type model 46 thur 48 business coupe just trying to learn as go along thxs:)

The following doors will fit your model

46-48 business coupe 3 Window

Dodge/DeSoto/Chrysler New yorker and Windsor models.

46-48 club coupe 5 Window

Dodge/DeSoto/Chrysler New Yorker and Windsor models.

All of these models listed above will fit your Dodge business coupe door openings. You should post on the main forum as you will get your answers quicker...You are in the technical archives.