sunvisor measurments for my 1950 Fargo/ Dodge anyone?

[dontknowitall]

Hi

are there any measurments availble for the frontscreen sunvisor, seen here in this picture, and were do I find any brackets to hold the screen on?

Edited January 26, 2010 by dontknowitall

[MBF]

There have been previous discussion threads on this. With the PH trucks, you have to make sure that you have enough height clearance to get the hood sides fully opened w/o hitting the visor. Check ebay-they periodically have these style visors and some w hardware. Mike

[dontknowitall]

Thanks for the info.. cheers Ryan

There have been previous discussion threads on this. With the PH trucks, you have to make sure that you have enough height clearance to get the hood sides fully opened w/o hitting the visor. Check ebay-they periodically have these style visors and some w hardware. Mike

[51 Fargo]

I have a fulton visor on my truck the thing you have to make sure of with this style is that you get the one that has the widest center piece not the narrow one. here is a pic of mine . this mounts to the inside door frame not the drip rail

[Jim Roach]

I have a Fulton visor that I want to mount on my 52 B3B but wasn't sure where to attach the mounting hardware. Could you give us a close up picture of the attaching points?

Thanks, Jim

[51 Fargo]

I have a Fulton visor that I want to mount on my 52 B3B but wasn't sure where to attach the mounting hardware. Could you give us a close up picture of the attaching points?

Thanks, Jim

here is some pics on how mine is mounted and the full width of my visor is 58 inches and the center piece is 9 inches wide like I said if it is narrow than 9 inch center it will not work on the truck

There is about a 1 1/2 inches of clearance between hood and visor

center section

Edited January 30, 2010 by 51 Fargo

[Jim Roach]

Thanks for the pics. That's exactly what I have been looking for.

Jim Roach