michael.warshaw Posted September 19, 2009 Report Posted September 19, 2009 Is there a place where they can be bought? Quote
alan32433 Posted September 19, 2009 Report Posted September 19, 2009 Find a local parts store that carries Dorman products. I think NAPA and Carquest usually carry them. They are typically behind the counter in a series of metal drawers. I found some at Ace hardware too. Make sure what you are getting are grade 8. Quote
michael.warshaw Posted September 19, 2009 Author Report Posted September 19, 2009 Thankls alot sir. Quote
Tom Skinner Posted September 20, 2009 Report Posted September 20, 2009 Dear Michael, The Dorman 3/8" 24 x 16 x 3" Studs I got from Fasten All were too short. they need to be 3-1/2" Long. The two Long ones in the Exhaust Manifold must be that long. The other 11 for all other Threaded Studs are about 2-3/4" Long and can be bought at any Good Hardware Store. Vintage Power Wagon has a Kit with all Brass Nuts, Studs, Spacers, and Special Washers just for this. The Kit is $60. I bought a Kit from Andy Bernbaum and it was short one 3-1/2" Long Stud. I called him and asked for him to send one to me, he never did. I should have sent his Kit back but didn't. My fault for not "fixing" the problem. Do yourself a favor and go to VintagePowerWagons.com and buy yourself a Kit. Tom Quote
michael.warshaw Posted September 20, 2009 Author Report Posted September 20, 2009 appreciate the help mr skinner Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.