ButchsCoolStuff

Well we manufacture a new Pedal kit that bolts into the stock location and uses a dual diaphram booster and dual master cyl under the floor. However it is for automatic trans cars only, no provisions for clutch pedal. We also sell the Fatman's Power Rack steering kits. Have installed several and they work very well. We offer the all new aluminum hub disc kit from ECI and it's a complete package. A little expensive, but it's the best! Thanks, Butch

Unfortunatley there has never been a dropped axle that uses the early Ply spindles. We have always had axles that use either 49/54 Chev (no longer have these) or early (37/48) Ford Spindles as they are so plentiful. You can install many different disc brake conversion kits on these Ford Spindles. Glad you found them on my site. I don't remember ever seeing one of those old MOPASR tube axles that was dropped. I believe the drop axle guys ONLY do the Forged I-Beam type axles. Hope I have helped, Butch

You can get our Biscuit style mounts specifically for your car, with illustrated instructions, at butchscoolstuff. We have the complete Eng/Tranny mount kits in stock. Thanks, Butch

Yeah, we been doing this for years, 25yrs as Butch's Rod Shop (1975-1999) and now as Butch's Cool Stuff, still in the Dayton Ohio area. We have just recently introduced a new dropped axle with Forged Ands, along with all attending parts needed. Check it out at www.butchscoolstuff.com and let us know if we can help you! thanks, Butch

Haven't done the BigBlock Chrysler into these yet. May in the near future. However my Small Block Chrysler mounts come with a way to center (for use with the Fatman's Power Rack Steering kit) or to offcenter the engine so it will clear the stock steering. Good instructions are included. Thanks, Butch

Come on guys, you can't seriously be using 2-1/2" wide rear spring perches on those original MOPAR 1-3/4" wide rear springs, are you??? Butch's Cool Stuff manufactures everything you need to mount any late model rear axle into most any old MOPAR car, including the 1-3/4" wide spring perches. Whole kits to individual parts, whatever you need, just check'em out at www.butchscoolstuff.com or call TECH LINE at 937-405-3399. Hope I have helped!!!! Butch (I'm back) Bunn, Dayton Ohio area

OK guys! This is Butch from ButchsCoolStuff (formerly ButchsRodShop 1975-1999). Our rear mount kits move the upper mount more verticle, I believe aprox 7" from center above the housing. Then we furnish a set of Monroe Gas Charged shocks. This seems to work really well and allows the shock to do it's job correctly. If I remember right, there is actually an original hole at the new location, thru the rail that even makes it easy to do. We machine up a set of tube spacers that do the relocating. We have just aquired these patterns again to make all these and will have them available in our complete kit or separately soon. Hope I have helped. Call Butch for Tech anytime at 937-405-3399 or email butch@butchscoolstuff.com

Hey Guys, i know this is a really old thread, but i wanted to let you know that I have revived the original Butch's Rod Shop and brought it back as Butch's Cool Stuff. I have a lot of the mopar stuff i used to and will be adding more this month. I also wanted to add that we went to Frog Follies last weekend and had a great show! Thank again to all of those great folks down there in Evansville IN!