53 plymouth cranbrook... 6v system. Started it and moved it around in the shop. I went to start it about an hour later and nothing. Checked fuel system and everything is good there. Pulled the plug and there is no spark at the plug.
I checked all wires and connections and all looks well. One thing I did notice is that the horn does not work now and did before. Tried the horn in both acc and start positions of the ignition switch and no horn. Notice in the wiring diagram that the horn relay acts as a daisy connection for the ignition wire which then goes to the input side of the coil. Could the horn relay be bad and cause this altough the connection is direct and does not pass throught the relay itself?
Talking with other older folks, they mentioned that the condensor in the rotor were known to go out...?
Any help, thoughts, or similar experiences? Thank you!!!
