pigheaded
-
Posts
40 -
Joined
-
Last visited
Content Type
Links Directory
Profiles
Articles
Forums
Downloads
Store
Gallery
Blogs
Events
Everything posted by pigheaded
-
Thanks for the heads-up on the wheels! I just got them. Now if he can come up with two more I will be set on wheels Thanks, Jerry
-
Thanks for the reply. I went out to the local salvage yard and found a 53/54 dodge out there. Looking at the wheels, they do look similar only they were 16 inch rims. I showed a picture to the guys at the yard and told them I was looking for a match. They laughed and told me good luck. So I guess one more parts request post. thanks again. Jerry
-
Hello, when I got my truck, I also got an assortment of wheels. the first picture attached is the 5 wheels that came with the truck. The one on the far left is a 14 inch tire and I guess was just thrown in the back of the truck when I got it. Not counting the 14" tire, I have what looks like three different wheel styles. I have not seen enough of these wheels to know which are which. Are any of these wheels correct for a 1950 Dodge B2C? Thanks, Jerry
-
I also leveled the frame to make it easy to work on the remaining parts. -
Now I got the frame on jacks and all 4 tires off. -
Finally pulled the engine. -
Finally got the cab off and put it on a cart I got from Lowes. Easy to move around on the cart. -
with the cab off. All O got to do now is remove the engine and I can start the clean up phase. -
I hope my engine looks half this good! -
The wheel is beat up good. guess I will have to find another one. -
Finally got all the bits and pieces off od the firewall. All that is left is removing the steering column and the engine will be ready to pull. -
An ashtray and a heater. What more do you need? -
This is the proverbial bucket of bolts. -
Now that the cab is clean I can start taking pictures and then strip the cab. -
I started clearing out the cab and this is a box of items that I found in there. -
Pulling wires away from the lights. -
Got both fenders off and working on removing the lights. -
Stripping out the engine bay -
I wanted to take off the front sheet metal. I could not get to some of the bolts, so I pulled off the fenders first.
