vickij37

ok so the different portions of the complete wire harness, may have different guage wire and need connectors to match, did i get that right?

Looking for Wheel hub(rear) for 49 pplymouth special deluxe

We see this box under solenoid, any idea what it is? it ok i got it

i agree fellas, beauty and class

so here is a pic of our project

we have spoken to wayne at plymouth dr. but he is currntly go through some things so we may have to look elsewhere.. also quick question this pic, shows a small metal box on below the sylinoid , any idea what it is?

fin

do the regular wire connectors work on the 6volt system>

ok so while he tinkers with the motor he gave me a list of replacement items to look up/buy... i have been doing research online and found what i thought would be someone for the floor pan, but we are looking to also not sink every penny into it... may only need partial floor pan sections and inner/outer rockers, but checking for, complete partial floor pan, master cyclinder and body mounts, any thought on leads? i found items on ebay, but we've been burned there so i really hesitate with ebay.................................. also he did the compression check and we're good there, it even almost, started so he is getting excited now!!!

thanks fellas! This helps

any suggestions also for body mount kits, and complete floor plans

so i got more info, sd it turns over slow will test /and is using starter fluid first as we have to get gas tank cleaned or new one not sure yet

we haven't done a compression test yet. We have made it through the plugs/wires, points and condensor, and have just gotten the starter off to get it rebuilt., we are also going to replace the battery cables as one looks frayed. Then we are planning on purchasing a new 6volt battery and see where this gets us. We've also talked about sending the motor up the road to a guy who rebuilds and just have the whole thing rebuilt, we just want to try ourselves first before taking on that cost.