wallytoo Posted April 28, 2008 Report Posted April 28, 2008 i learned a little bit more about the way the rubber works on a ph-cab. i installed a new robert's gasket back in october, when i had to replace one of the windshields. it fit decently enough, and i used rope to pull the seal lip through from the inside of the cab to the outside. however, the lower corners did have a slight leak all through the winter (not as bad as my CJ, though ). fast forward to today. it's the first solid, heavy rain in the last month. over the weekend, i finally got around to installing the interior trim/retainer and inner/outer center bar on the windshields, and used slightly oversize screws on the lower part, allowing the retainer to really pinch the gasket all the way around. and, low and behold, the leaks have stopped. i should have finished with the retainers a long time ago; i could have avoided the stalagmite/stalactite formations over the winter. oh, and my cowl vent rubber that i installed a few weeks ago is working, too. Quote
woodscavenger Posted May 5, 2008 Report Posted May 5, 2008 Where did you get the gaskets and how much $$$? Quote
wallytoo Posted May 5, 2008 Author Report Posted May 5, 2008 robert's (motor parts). i believe it was about $65 with shipping. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.