Guest steze482000 Posted November 21, 2007 Report Posted November 21, 2007 Hello, Looking for the engine specs. for a 54 Chrysler 251 flathead engine. Crank pin dia. main dia. etc. Planning to put in my 50 Dodge Wayfarer sedan. Any help would be greateful....Thank you, Steve Quote
PatS.... Posted November 21, 2007 Report Posted November 21, 2007 Steve, you are aware thet the 251 is a "long block"? It is 25 inches. The "short block" is 23 inches. As posted by Don Coatney, there is a bit of work involved in the swap...not a bolt in. Quote
Don Coatney Posted November 22, 2007 Report Posted November 22, 2007 Hello, Looking for the engine specs. for a 54 Chrysler 251 flathead engine. Crank pin dia. main dia. etc. Planning to put in my 50 Dodge Wayfarer sedan. Any help would be greateful....Thank you, Steve I dont think Crashler used a 251 CI engine in 1954. Believe it to be a 265 CI engine. Quote
Guest 52dodgecoronet Posted April 9, 2008 Report Posted April 9, 2008 http://carnut.com/specs/gen/_soto50m.html I believe you'll find what your looking for here. Desoto used a 250.6 cu in motor. Quote
Don Coatney Posted April 9, 2008 Report Posted April 9, 2008 http://carnut.com/specs/gen/_soto50m.htmlI believe you'll find what your looking for here. Desoto used a 250.6 cu in motor. That is correct for Desoto but Chrysler used a 264.5" engine starting in 1953 for all 6 cylinder applications. http://carnut.com/specs/fspecs.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.